ILMA Letters

2010

• Feb. 17, 2010: AQMD Comments
• Feb. 12, 2010: EPA re: Chlorinated Paraffins
• Feb. 1, 2010: ACGIH: Mineral Oil, excluding Metal Working Fluids
• Jan. 15, 2010: UEIL — PSA Peugeot Citroen

2009 Archive

• Dec. 29, 2009: Docket H­022K­2006­0062; Proposed Rule; Request for Comments
• Dec. 16, 2009: South Coast Air Quality Management District Proposed Rule 1144
• Nov. 16, 2009: GM dexos Comments
• Nov. 9, 2009: California ‘Green Chemistry’ DTSC
• Oct. 23, 2009: American Petroleum Institute Re: GF-5/API License Program
• Oct. 22, 2009, South Coast Air Quality Management District Proposed Rule 1144
• Sept. 24, 2009, South Coast Air Quality Management District Proposed Rule 1144
• July 30, 2009: Chemical Safety and Hazard Investigation Board-09-01; Advanced Notice of Proposed Rulemaking Response
• July 30, 2009: American Conference of Governmental Industrial Hygienists Response
• July 30, 2009: South Coast Air Quality Management District Proposed Rule 1144 — Lubricants, Metalworking Fluids and Rust Inhibitors
• June 9, 2009: Comments on EPA Proposed Greenhouse Gas Reporting Rulemaking
• March 5, 2009: Deadline Extension Request for 10+2 Structured Review
• March 5, 2009, South Coast Air Quality Management District Proposed Rule 1144-Vanishing Oils and Rust Inhibitors
• March 5, 2009, EPA SPCC Comment
• Feb. 20, 2009, Chlorinated Paraffins Under the Canadian Environmental Protection Act
• Feb. 1, 2009, ACGIH: Metalworking Fluids Excluded from Proposed Mineral Oil TLV
• January 6, 2009 South Coast Air Quality Management District Proposed Rule 1144 — Lubricants and Rust Inhibitors

2008 Archive

• November 21, 2008, South Coast Air Quality Management District Proposed Rule 1114
• South Coast Air Quality Management District Proposed Rule 1144 — Lubricants and Rust Inhibitors
• ILMA Comments: South Coast Air Quality Management District Proposed Rule 1144 — Lubricants and Rust Inhibitors
  
• ILMA Comments to ACGIH on TLV for Metalworking Fluids
  
• June 23, 2008 ILMA Comments to FTC on Base Oil Pricing
  
• Congratulations to NLGI on 75th Anniversary
  
• April 4, 2008, Open Letter to Supplier Members - The Complications of REACH Regulation
  
• February 29, 2008 Letter to OSHA re: ILMA Nomination of Dr. Eugene White to NACOSH
  
• February 1, 2008 Letter to ILMA from ACGIH regarding TLV-TWA for Mineral Oil on the 2008 Notice of Intended Changes

2007 Archive

• ILMA Comments to ACGIH on TLVs for Mineral Oil used in Metalworking Fluids - July 24, 2007
  
• ILMA Comments to Pipeline and Hazardous Materials Administration
  
• February 1, 2007 Letter to ILMA from ACGIH regarding TLV-TWA for Mineral Oil on the 2007 Notice of Intended Changes
  
• ILMA Comments on the Notice of Intent to Waive Nonmanufacturer Rule for Re-Refining Used Petroleum Lubricating Oils-January 26, 2007

2006 Archive

• ILMA Comments on H-022K - 11-13-06
  • Exhibit 1
  • Exhibit 2
• Letter from ILMA to API regarding ATFs
• ILMA Comments to ACGIH on TLVs for Mineral Oil used in Metalworking Fluids - July 28, 2006
• ACGIH Letter to ILMA regarding November 2005 TLV Comments
• ILMA Non-Consensus Standard Hearing Statement – April 27th
• ILMA Letter to EPA Regarding Spill Prevention, Control, and Countermeasure (SPCC) Amendments – February 10th

2005 Archive

• ILMA Nov 1 2005 Letter to Factory Mutual
• ILMA Letter to DOE Secretary Bodman Regarding Base Oil Supply in Gulf Coast Area
• UEIL Response to Europia's Comments About the Re-Refining Industry
• Feb 2005 Letter to Hastert re ExxonMobil and Daimler Chrysler

2004 Archive

• Letter From FTC Denying ILMA Complaint Against DCC
• ILMA Letter to Division of Measurement Standards re NCWM
• ILMA Letter to Kevin Ferrick (API) Regarding API SM, 06/30/04
• ILMA Letter to Spencer Abraham (DOE) Regarding NPC study
• ILMA Letter to Robert Frisby (FTC) Regarding DCC complaint, 06/28/04
• Letter Requesting ILSAC GF-4-licensed Marketers to Provide Information to EPA
• ILSAC Final GF-4 Standard: Revised June 2004
• Letter from EPA to OEMs Regarding GF-4
• March 2004 Letter to Althea Henry (Delaware) Regarding Contract
• March 2004 Letter to FTC Regarding DaimlerChrysler Complaint
• ILSAC response to ILMA, Re: ILMA Comments on Second Draft ILSAC GF-4 Standard
• Final ILMA letter to ILSAC/Oil Committee Re Draft GF-4 Specification

2003 Archive

• OSHA Formally Denies 1993 UAW Petition
• Responds to ILSAC/Oil Committee about GF-4
• ILSAC/Oil Responds to ILMA Comments on GF-4
• ILMA Letter to FTC Regarding DaimlerChrysler
• ILMA Comments on Draft ILSAC GF-4 Specification
• ILMA Letter to Directorate General re European Chemicals Policy
• ILMA Letter to FTC re Shell Application
• ILMA Letter to EPA - Docket ID No OPA-2002-01

2002 Archive

• ILMA's Response for Assistance on the RCRA Used Oil Rebuttable Presumption Guide Tables
  • Metalworking Fluid Additives Table
  • Table 10: Composition, Application and Functions of Lubricating Additives
  • Used Oil Reputable Presumption
• ILMA Letter to OSHA to Review and Update Website Area on Metalworking Fluids
• ILMA Response and Comments to ACGIH for 2002 Symposium
• Comments to EPA by National Petrochemical and Refiners Association on the Proposed Rule at 40 CFR Parts 3, 51, et al…Establishment of Electronic Reporting: Electronic Records

2001 Archive

• ILMA Letter to Secretary Chao Regarding ACGIH Proposed TLV
• ILMA Response to ACGIH for Request for Further Information Regarding Proposed TLV and A2 Classification
• ILMA Comments to OSHA on Possible Approaches to Address Ergonomic Hazards in the Workplace
• ILMA Comments to EPA the Proposed Effluent Limitations Guidelines for the Metal Products and Machinery Point Source Category
• ILMA Comments to NTP Regarding NIOSH's Draft Metalworking Fluids, Recommendation for Chronic Inhalation Study